Milled and turned metal parts, from one piece to a few hundred, held to the tolerance printed on your drawing.
General notes
- All dimensions in millimetres.
- Every figure on these sheets is illustrative.
- Break sharp edges 0.2 max unless the print says otherwise.
- Material, finish and tolerance per part sheet.
Port thread, G1/4, 6H, depth 12 mmIllustrative
Reading a tolerance frame
- Symbol: what is controlled. Here a diameter.
- Zone: how far it may wander, in mm.
- Datum: the face or axis it is measured from.
On the drawing, each numbered square is one such frame. Tap or focus it to read its record.
Parts list
Six of twelve illustrative parts.
| Sheet | Part no. | Name | Material | Process | Envelope |
|---|---|---|---|---|---|
| 3.01 | TV-1001 | Manifold block | Aluminium EN AW-6082 T6 | Milling | 160 × 90 × 28 mm |
| 3.02 | TV-1002 | Splined hub disc | Steel C45 | Mill-turn | Diameter 80 × 12 mm |
| 3.03 | TV-1003 | Threaded fitting | Stainless 1.4301 | Turning | Diameter 24 × 38 mm |
| 3.04 | TV-1004 | Brass threaded bush | Brass CuZn39Pb3 | Turning | Diameter 20 × 30 mm |
| 3.05 | TV-1005 | Stainless flange | Stainless 1.4404 | Mill-turn | Diameter 90 × 10 mm |
| 3.12 | TV-1012 | Titanium bracket | Titanium Ti-6Al-4V | Milling (5-axis) | 140 × 60 × 25 mm |
What we make, in numbers a buyer reads
Illustrative figures.
| Process | Envelope | Tolerance | Materials |
|---|---|---|---|
| Milling | up to 400 × 250 × 150 mm | ±0.02 mm typical | Aluminium, steel, stainless, copper, titanium, plastics |
| Turning | up to diameter 120 × 300 mm | ±0.01 mm typical | Brass, steel, stainless, aluminium, plastics |
| Mill-turn | up to diameter 80 × 200 mm | ±0.015 mm typical | Steel, stainless, brass, aluminium |
| Drilling and tapping | within the part envelope | thread class 6H / 6g | All above |
How a job runs
Send the drawing
A PDF, DXF or STEP file and the quantity you need.
We read it
An engineer checks material, tolerances and anything unusual, and writes back with questions if needed.
You get a price
A fixed price and a lead time, with the assumptions written down. In this concept the price is only an example.
Parts and report
Parts ship with a dimensional report for the features you mark critical.
Checked against your print
Every part is measured against the drawing, and critical features get a report. This site makes no certification claims.