Titanium bracket
IllustrativeTV-1012 Rev A Titanium Ti-6Al-4V, Milling (5-axis)
A lightweight titanium bracket with a thin web and two reamed holes. Machined from solid.
Drawing and callouts
Web thickness, 1.2 mm, ±0.05Illustrative
- Drawing no.
- TV-1012-A
- Revision
- A
- Status
- Illustrative
- Drawn by
- Tolvane (fictional)
| No. | Feature | Nominal | Tolerance | Unit | Note |
|---|---|---|---|---|---|
| 1 | Web thickness | 1.2 | ±0.05 | mm | - |
| 2 | Reamed holes | 2 × 6 | +0.012 / 0 | mm | H7 |
| 3 | Hole spacing | 90 | ±0.03 | mm | - |
| 4 | Overall flatness | 0 | 0.05 max | mm | - |
| 5 | Corner radius | 3 | ±0.2 | mm | - |
No photograph for this part; the drawing is the reference.
Specification table
Illustrative. Not a measured capability or a certified value.
| Property | Value | Note |
|---|---|---|
| Material | Titanium Ti-6Al-4V | Illustrative |
| Envelope | 140 × 60 × 25 mm | Illustrative |
| General tolerance | ±0.1 mm | Unless stated; illustrative |
| Surface roughness Ra | 1.6 µm | Illustrative |
| Mass | about 0.2 kg | Illustrative |
Lead time and price
Examples for this concept; a real quote depends on your drawing.
- Finish
- Bead blast (example)
- Lead time
- About 18 working days (example)
- Price
- From EUR 210.00 per piece at 10 pieces (example)
- Typical use
- Lightweight frames, prototypes
Download datasheet (PDF)
A fictional, illustrative datasheet generated for this concept. about 1 page, A4.
Send a drawing for this part