Concept project — fictional brand

Back to Artlogic
Skip to main content

Splined hub disc

Illustrative

TV-1002 Rev A Steel C45, Mill-turn

A round steel disc with a splined bore and a flat, ground-look face. Turned first, then milled for the splines in one set-up.

Drawing and callouts

TV-1002-A Rev A
Bore, 25 mm, +0.021 / 0, H7Illustrative
Drawing no.
TV-1002-A
Revision
A
Status
Illustrative
Drawn by
Tolvane (fictional)
Callouts
No.FeatureNominalToleranceUnitNote
1Bore25+0.021 / 0mmH7
2Splines12 teeth±0.03-on bore
3Face runout00.02 maxmm-
4Face flatness00.015 maxmm-
5Outer diameter80±0.05mm-
Ground steel discs with splined hubs and radial polish lines, generated illustration standing in for part TV-1002
Reference photograph, generated image. It represents the kind of part, not this exact piece.

Specification table

Illustrative. Not a measured capability or a certified value.

Specification table, TV-1002
PropertyValueNote
MaterialSteel C45Illustrative
EnvelopeDiameter 80 × 12 mmIllustrative
General tolerance±0.1 mmUnless stated; illustrative
Surface roughness Ra0.8 µm on facesIllustrative
Massabout 0.47 kgIllustrative

Lead time and price

Examples for this concept; a real quote depends on your drawing.

Finish
Black oxide or oiled (example)
Lead time
About 12 working days (example)
Price
From EUR 22.50 per piece at 50 pieces (example)
Typical use
Drives, couplings, indexing
Download datasheet (PDF)

A fictional, illustrative datasheet generated for this concept. about 1 page, A4.

Send a drawing for this part