Concept project — fictional brand

Back to Artlogic
Skip to main content

Manifold block

Illustrative

TV-1001 Rev A Aluminium EN AW-6082 T6, Milling

A pocketed aluminium block with three threaded ports, a through bore and a shallow routed channel on the top face. A typical part for fluid and pneumatic assemblies.

Drawing and callouts

TV-1001-A Rev A
Port thread, G1/4, 6H, depth 12 mmIllustrative
Drawing no.
TV-1001-A
Revision
A
Status
Illustrative
Drawn by
Tolvane (fictional)
Callouts
No.FeatureNominalToleranceUnitNote
1Port threadG1/46H-depth 12 mm
2Through bore22+0.021 / 0mmH7
3Channel depth4.0±0.1mm-
4Port position35.0 from edge±0.05mm-
5Top face flatness00.03 maxmm-
Machined aluminium manifold block with threaded ports and ribbed channels, generated illustration standing in for part TV-1001
Reference photograph, generated image. It represents the kind of part, not this exact piece.

Specification table

Illustrative. Not a measured capability or a certified value.

Specification table, TV-1001
PropertyValueNote
MaterialAluminium EN AW-6082 T6Illustrative
Envelope160 × 90 × 28 mmIllustrative
General tolerance±0.1 mmUnless stated; illustrative
Surface roughness Ra1.6 µmMachined faces; illustrative
Massabout 0.9 kgIllustrative

Lead time and price

Examples for this concept; a real quote depends on your drawing.

Finish
Bead blast or as machined (example)
Lead time
About 10 working days (example)
Price
From EUR 46.00 per piece at 25 pieces (example)
Typical use
Hydraulic and pneumatic assemblies, test rigs
Download datasheet (PDF)

A fictional, illustrative datasheet generated for this concept. about 1 page, A4.

Send a drawing for this part