Stainless flange
IllustrativeTV-1005 Rev A Stainless 1.4404, Mill-turn
A round stainless flange with a central bore, a seal groove and six bolt holes on a pitch circle.
Drawing and callouts
Central bore, 40 mm, +0.039 / 0, H8Illustrative
- Drawing no.
- TV-1005-A
- Revision
- A
- Status
- Illustrative
- Drawn by
- Tolvane (fictional)
| No. | Feature | Nominal | Tolerance | Unit | Note |
|---|---|---|---|---|---|
| 1 | Central bore | 40 | +0.039 / 0 | mm | H8 |
| 2 | Bolt holes | 6 × 9 | ±0.1 | mm | on 70 mm pitch circle |
| 3 | Seal groove depth | 2.5 | ±0.05 | mm | - |
| 4 | Pitch circle | 70 | ±0.05 | mm | - |
| 5 | Face flatness | 0 | 0.03 max | mm | - |
No photograph for this part; the drawing is the reference.
Specification table
Illustrative. Not a measured capability or a certified value.
| Property | Value | Note |
|---|---|---|
| Material | Stainless 1.4404 | Illustrative |
| Envelope | Diameter 90 × 10 mm | Illustrative |
| General tolerance | ±0.1 mm | Unless stated; illustrative |
| Surface roughness Ra | 1.6 µm; 0.8 µm on seal face | Illustrative |
| Mass | about 0.5 kg | Illustrative |
Lead time and price
Examples for this concept; a real quote depends on your drawing.
- Finish
- Passivated (example)
- Lead time
- About 12 working days (example)
- Price
- From EUR 31.00 per piece at 25 pieces (example)
- Typical use
- Pipework, pumps, process equipment
Download datasheet (PDF)
A fictional, illustrative datasheet generated for this concept. about 1 page, A4.
Send a drawing for this part