Concept project — fictional brand

Back to Artlogic
Skip to main content

Brass threaded bush

Illustrative

TV-1004 Rev A Brass CuZn39Pb3, Turning

A free-cutting brass bush with an external thread and a small flange. Fast to turn, clean to thread.

Drawing and callouts

TV-1004-A Rev A
Thread, M12 × 1.25, 6g, length 14 mmIllustrative
Drawing no.
TV-1004-A
Revision
A
Status
Illustrative
Drawn by
Tolvane (fictional)
Callouts
No.FeatureNominalToleranceUnitNote
1ThreadM12 × 1.256g-length 14 mm
2Flange diameter20-0.05 / -0.10mm-
3Overall length30±0.1mm-
4Through bore6+0.012 / 0mmH7
5Thread-to-face squareness00.05 maxmm-
Brass threaded part next to a stainless flange, generated illustration standing in for part TV-1004
Reference photograph, generated image. It represents the kind of part, not this exact piece.

Specification table

Illustrative. Not a measured capability or a certified value.

Specification table, TV-1004
PropertyValueNote
MaterialBrass CuZn39Pb3Illustrative
EnvelopeDiameter 20 × 30 mmIllustrative
General tolerance±0.1 mmUnless stated; illustrative
Surface roughness Ra0.8 µmIllustrative
Massabout 0.05 kgIllustrative

Lead time and price

Examples for this concept; a real quote depends on your drawing.

Finish
As turned (example)
Lead time
About 7 working days (example)
Price
From EUR 3.90 per piece at 500 pieces (example)
Typical use
Sanitary and gas fittings, electrical hardware
Download datasheet (PDF)

A fictional, illustrative datasheet generated for this concept. about 1 page, A4.

Send a drawing for this part