Valve spindle
IllustrativeTV-1009 Rev A Stainless 1.4404, Turning
A slender stainless spindle with a threaded end, a sealing cone and a ground-style shank.
Drawing and callouts
Thread, M8 × 1, 6g, length 16 mmIllustrative
- Drawing no.
- TV-1009-A
- Revision
- A
- Status
- Illustrative
- Drawn by
- Tolvane (fictional)
| No. | Feature | Nominal | Tolerance | Unit | Note |
|---|---|---|---|---|---|
| 1 | Thread | M8 × 1 | 6g | - | length 16 mm |
| 2 | Shank | 10 | h6 | mm | - |
| 3 | Sealing cone | 30 | ±0.5 | deg | - |
| 4 | Overall length | 110 | ±0.1 | mm | - |
| 5 | Shank straightness | 0 | 0.03 max | mm | - |
No photograph for this part; the drawing is the reference.
Specification table
Illustrative. Not a measured capability or a certified value.
| Property | Value | Note |
|---|---|---|
| Material | Stainless 1.4404 | Illustrative |
| Envelope | Diameter 12 × 110 mm | Illustrative |
| General tolerance | ±0.1 mm | Unless stated; illustrative |
| Surface roughness Ra | 0.8 µm on shank | Illustrative |
| Mass | about 0.09 kg | Illustrative |
Lead time and price
Examples for this concept; a real quote depends on your drawing.
- Finish
- Passivated (example)
- Lead time
- About 12 working days (example)
- Price
- From EUR 17.60 per piece at 50 pieces (example)
- Typical use
- Valves, dosing equipment
Download datasheet (PDF)
A fictional, illustrative datasheet generated for this concept. about 1 page, A4.
Send a drawing for this part