Heat-sink base
IllustrativeTV-1010 Rev A Copper Cu-ETP, Milling
A copper base plate with a field of thin fins. The tolerance that matters is the base flatness, the second is fin thickness.
Drawing and callouts
Fin thickness, 1.2 mm, ±0.05Illustrative
- Drawing no.
- TV-1010-A
- Revision
- A
- Status
- Illustrative
- Drawn by
- Tolvane (fictional)
| No. | Feature | Nominal | Tolerance | Unit | Note |
|---|---|---|---|---|---|
| 1 | Fin thickness | 1.2 | ±0.05 | mm | - |
| 2 | Fin pitch | 3.0 | ±0.05 | mm | - |
| 3 | Base flatness | 0 | 0.03 max | mm | - |
| 4 | Base thickness | 6 | ±0.1 | mm | - |
| 5 | Mounting holes | 4 × 6.5 | ±0.1 | mm | - |
No photograph for this part; the drawing is the reference.
Specification table
Illustrative. Not a measured capability or a certified value.
| Property | Value | Note |
|---|---|---|
| Material | Copper Cu-ETP | Illustrative |
| Envelope | 260 × 120 × 25 mm | Illustrative |
| General tolerance | ±0.1 mm | Unless stated; illustrative |
| Surface roughness Ra | 1.6 µm on base | Illustrative |
| Mass | about 4.2 kg | Illustrative |
Lead time and price
Examples for this concept; a real quote depends on your drawing.
- Finish
- As machined (example)
- Lead time
- About 15 working days (example)
- Price
- From EUR 148.00 per piece at 10 pieces (example)
- Typical use
- Power electronics, test equipment
Download datasheet (PDF)
A fictional, illustrative datasheet generated for this concept. about 1 page, A4.
Send a drawing for this part