Mounting bracket
IllustrativeTV-1008 Rev A Aluminium EN AW-5083 H111, Milling
A long flat aluminium bracket with four mounting holes and a slot. Plain and large, which is what makes flatness the number to read.
Drawing and callouts
Mounting holes, 4 × 8.5 mm, ±0.1, position ±0.1Illustrative
- Drawing no.
- TV-1008-A
- Revision
- A
- Status
- Illustrative
- Drawn by
- Tolvane (fictional)
| No. | Feature | Nominal | Tolerance | Unit | Note |
|---|---|---|---|---|---|
| 1 | Mounting holes | 4 × 8.5 | ±0.1 | mm | position +/-0.1 |
| 2 | Slot | 30 × 8 | ±0.1 | mm | - |
| 3 | Overall flatness | 0 | 0.1 max | mm | - |
| 4 | Thickness | 15 | ±0.1 | mm | - |
| 5 | Hole pitch | 280 | ±0.1 | mm | - |
No photograph for this part; the drawing is the reference.
Specification table
Illustrative. Not a measured capability or a certified value.
| Property | Value | Note |
|---|---|---|
| Material | Aluminium EN AW-5083 H111 | Illustrative |
| Envelope | 320 × 140 × 15 mm | Illustrative |
| General tolerance | ±0.2 mm | Unless stated; illustrative |
| Surface roughness Ra | 3.2 µm | Illustrative |
| Mass | about 1.8 kg | Illustrative |
Lead time and price
Examples for this concept; a real quote depends on your drawing.
- Finish
- As machined or bead blast (example)
- Lead time
- About 10 working days (example)
- Price
- From EUR 58.00 per piece at 10 pieces (example)
- Typical use
- Frames, machine fixtures, supports
Download datasheet (PDF)
A fictional, illustrative datasheet generated for this concept. about 1 page, A4.
Send a drawing for this part