Sensor housing
IllustrativeTV-1007 Rev A Aluminium EN AW-6082 T6, Milling
A compact aluminium housing with a stepped bore, two tapped holes and thin walls.
Drawing and callouts
Stepped bore, 16 mm, +0.018 / 0, H7Illustrative
- Drawing no.
- TV-1007-A
- Revision
- A
- Status
- Illustrative
- Drawn by
- Tolvane (fictional)
| No. | Feature | Nominal | Tolerance | Unit | Note |
|---|---|---|---|---|---|
| 1 | Stepped bore | 16 | +0.018 / 0 | mm | H7 |
| 2 | Tapped holes | 2 × M3 | 6H | - | depth 6 mm |
| 3 | Wall thickness | 1.5 | ±0.1 | mm | - |
| 4 | Mounting face flatness | 0 | 0.05 max | mm | - |
| 5 | Hole spacing | 28 | ±0.05 | mm | - |
No photograph for this part; the drawing is the reference.
Specification table
Illustrative. Not a measured capability or a certified value.
| Property | Value | Note |
|---|---|---|
| Material | Aluminium EN AW-6082 T6 | Illustrative |
| Envelope | 48 × 32 × 20 mm | Illustrative |
| General tolerance | ±0.1 mm | Unless stated; illustrative |
| Surface roughness Ra | 1.6 µm | Illustrative |
| Mass | about 0.04 kg | Illustrative |
Lead time and price
Examples for this concept; a real quote depends on your drawing.
- Finish
- Clear anodise (example)
- Lead time
- About 10 working days (example)
- Price
- From EUR 12.40 per piece at 100 pieces (example)
- Typical use
- Sensors, electronics enclosures
Download datasheet (PDF)
A fictional, illustrative datasheet generated for this concept. about 1 page, A4.
Send a drawing for this part