Insulating spacer
IllustrativeTV-1011 Rev A POM-C acetal, Turning
A turned acetal spacer with a central bore. Parallel faces are the point.
Drawing and callouts
Bore, 10 mm, +0.022 / 0, H8Illustrative
- Drawing no.
- TV-1011-A
- Revision
- A
- Status
- Illustrative
- Drawn by
- Tolvane (fictional)
| No. | Feature | Nominal | Tolerance | Unit | Note |
|---|---|---|---|---|---|
| 1 | Bore | 10 | +0.022 / 0 | mm | H8 |
| 2 | Face parallelism | 0 | 0.05 max | mm | - |
| 3 | Outer diameter | 30 | ±0.05 | mm | - |
| 4 | Thickness | 15 | ±0.1 | mm | - |
| 5 | Edge break | 0.3 | ±0.1 | mm | - |
No photograph for this part; the drawing is the reference.
Specification table
Illustrative. Not a measured capability or a certified value.
| Property | Value | Note |
|---|---|---|
| Material | POM-C acetal | Illustrative |
| Envelope | Diameter 30 × 15 mm | Illustrative |
| General tolerance | ±0.1 mm | Unless stated; illustrative |
| Surface roughness Ra | 1.6 µm | Illustrative |
| Mass | about 0.015 kg | Illustrative |
Lead time and price
Examples for this concept; a real quote depends on your drawing.
- Finish
- As turned (example)
- Lead time
- About 6 working days (example)
- Price
- From EUR 2.10 per piece at 500 pieces (example)
- Typical use
- Electrical assemblies, jigs
Download datasheet (PDF)
A fictional, illustrative datasheet generated for this concept. about 1 page, A4.
Send a drawing for this part